A mineral-insulated sheathed heating conductor, consists of a live inner core (heating wire), which is shielded against the metal sheath with magnesium oxide in the heating part and cold part. In particular, the diameter and the nature of the inner core have an influence on the resistance and thus on the heating capacity of the heating conductor. A high-quality sheath material determines the maximum operating temperature and resistance under certain environmental influences.
The special thing about our customized solution is that you can define heating part and cold part lengths according to your requirements using the table below. We offer you an enormously wide range of customized solutions. We will be pleased to assemble your sheathed heatsealing band with transitionless cold ends with ceramic current connections or stranded wires. Of course, we will be happy to support you in the calculation of the heatsealing band and are available to answer any questions you may have in connection with your heating application. Special designs are already possible from small quantities. Please contact us at any time.
|Core resistance Ohm/m at 20°C:|
|Sheath material finish||Diameter heating conductor in mm||Minimum length of heating element in mm||Heating part||Cold part|
|Stainless steel 1.4541 (MKV), Inconel 600 (MKI)||1,0||250||12,5||< 1,3|
|Stainless steel 1.4541 (MKV), Inconel 600 (MKI)||1,5||250||5,5||< 0,6|
|Stainless steel 1.4541 (MKV), Inconel 600 (MKI)||2,0||250||3,1||< 0,3|
|Stainless steel 1.4541 (MKV), Inconel 600 (MKI)||3,0||250||1,4||< 0,2|
|Stainless steel 1.4541 (MKV), Inconel 600 (MKI)||> 3,0||250|
Outer diameter +/- 0.08mm
Bending radius: 2-3x outer diameter of heatsealing band
Length tolerance of heating part: +/- 10%
Resistance: +/- 10%