Sheathed Thermocouple with Standard Connector
Mineral-insulated sheathed thermocouples with standard connectors (round contacts) can be used in virtually all industrial sectors and in research and development due to their particularly robust design. They offer good protection against vibration and pressure during temperature measurement—and, depending on the selected sheath material, high resistance to corrosion, oxidation, and aggressive environmental conditions.
Sheathed cable in accordance with DIN EN 61515; thermocouple (inner conductors) in accordance with DIN EN 60584-1. The flexible, mineral-insulated sheathed cable protects the inner conductors from environmental influences and mechanical stress.
Operating temperature of the measuring point: -200 to +1,800 °C, depending on the selected thermocouple type and the diameter of the sheathed cable.
We can manufacture your miniature sheathed thermocouple with a sensor length (mineral-insulated section) ranging from a few millimeters to 60 meters.
Depending on your requirements, the design is available with a standard plug, a standard socket, or a 3-pin connector. The plug contacts are round and always match the thermocouple type (e.g., Type K) of the selected sheathed thermocouple.
Available with a plastic connector (200 °C) or a ceramic connector (600 °C), as needed.
Available as a single thermocouple (standard) or, upon request,
as a dual thermocouple (for types K, N, and J).
Class 2 (Standard); Class 1 available upon request.
Type of measurement point: isolated, jacket-welded, or exposed
Selectable jacket diameter: Ø 0.5 mm – 8.0 mm
Other models and jacket materials are available upon request.
| Type | Type K, Type J, Type N, Type E, Type T, Type L, Type S, Type R, Type B |
|---|---|
| Sheath diameter | 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm, 4.5 mm, 6.0 mm, 8.0 mm |
| Sheath material | Inconel 600, stainless steel, platinum, VXS special alloy |
| Execution measuring point | insulated, jacketed, exposed |
| Connection | Round-contact plug, round-contact socket, 3-pole round-contact plug for TE Ø1.0–6.0 mm, 3-pole round-contact socket for TE Ø1.0–6.0 mm, round-contact plug (ceramic), round-contact socket (ceramic) |
Your Configuration
- Free shipping on all orders over $50
- 30-day easy returns
- All taxes and customs duties included
Questions about making the right choice?
Do you need help configuring your thermocouple? Are you unsure which model is right for your application? Heiko Gevert and the entire team look forward to assisting you.
You can buy thermocouples anywhere, but you'll only find the right one from an expert.
10 Reasons Why We're the Right Choice for Your Project:
If you need even more precision
The highest standard according to DIN EN 60548 is our minimum requirement when it comes to the quality of our sheathed thermocouples. And if your requirements for the precision of our products and solutions are even higher, our value-added services make all the difference.
If the accuracy of the measurement is important, we calibrate our mineral-insulated sheathed thermocouples using the fixed point or comparison method. This allows deviations within the standard to be determined precisely. Especially when several measuring points are present in applications, it can be important to know the exact deviation of the individual thermocouples. Accordingly, we offer factory calibration as well as DAkkS calibration.
X-ray inspection is a non-destructive and highly precise method for examining and verifying the properties and integrity of materials. This imaging technique can be used to identify defects in installed sheathed thermocouples or heating elements. It is also used, for example, to precisely determine the measurement point, ensuring that the sheathed thermocouple can be installed accurately. Upon request, we are happy to provide our thermocouples with X-ray images, including dimensions and labeling.
The helium leak test is primarily used for components that are used for an application or in a production process that takes place in a vacuum or ultra-high vacuum (UHV). In order to avoid pressure loss in the application, we test welds and screw connections on our sheath thermocouples or heating applications in advance. On request, we can also supply vacuum-compatible products, including a test report, which are ready for immediate use on site.
